Digital tube driver and keyboard control chip CH452


The CH452 is a digital tube display driver and a keyboard scan control chip.CH452 has built-in clock oscillator circuit, which can dynamically drive 8-digit digital tube or 64 LED tubes, with BCD decoding, flickering, shifting, segment addressing, beam decoding etc. It can also perform 64-key keyboard scanning; The CH452 exchanges data with a single-chip microcomputer through a 4-wire serial interface or a 2-wire serial interface that can be cascaded; and can provide a power-on reset signal to single chip microcomputer.


2.1. Display driver

  • Built-in current drive stage, segment current is not less than 20mA, word current is not less than 100mA.
  • Dynamic display scanning control, direct drive 8-digit digital tube or 64 LED Luminous tubes or 64-level beam.
  • The segment of the digital tube and data bit can be chosen as no decoding mode or BCD decoding mode.
  • BCD decoding supports a custom BCD code for displaying a special character.
  • Left shift, right shift, left loop, right loop of the digital tube word data.
  • Each digital tube is digitally flashed independently, both fast and slow flicker speeds can be selected.
  • Arbitrary segment addressing, independently controlling the on and off of each LED or each segment of each digital tube.
  • 64-level beam decoding, the column value is displayed by a light column consisting of 64 LEDs.
  • Scanning limit control, supports 1 to 8 digital tubes, and only allocates scan time for valid digital tubes.
  • 16 levels of brightness control are provided by the duty cycle setting.
  • The word drive output polarity can be selected to facilitate external expansion of the drive voltage and current.

2.2. keyboard control

  • Built-in 64-key keyboard controller based on 8×8 matrix keyboard scan.
  • Built-in debounce circuit with pull-down resistor for built-in button status input.
  • Keyboard interrupt, you can choose low-level active output or low-level pulse output.
  • A button release flag is provided for querying the button to be pressed and released.
  • Support button wake-up, CH452 in low power saving state can be awakened by partial button.

2.3. External interface

  • The same chip, a high-speed 4-wire serial interface or an economical 2-wire serial interface can be chosen.
  • 4-wire serial interface: Supports multiple chip cascades, clock speeds from 0 to 2MHz, compatible with CH451 chips.
  • 4-wire serial interface: DIN and DCLK signal lines can be shared with other interface circuits, saving pins.
  • 2-wire serial interface: Supports two CH452 chips in parallel (the respective addresses are set by the ADDR pin level).
  • 2-wire serial interface: 400KHz clock speed, compatible with two-wire I2C bus, saving pins.
  • Built-in power-on reset which provides an active-high and active-low reset output for the single chip microcomputer.

2.4. Other miscellaneous

  • Built-in clock oscillating circuit, no need to provide external clock or external oscillating components, more anti-interference.
  • Supports low-power sleep, saves power, can be woken up by a button or wake up by a command operation.
  • Support 3V~5V voltage.
  • Available in SOP28 and DIP24S lead-free packages, compatible with RoHS, pins are compatible with the CH451 chip.

relation files

file name file content
CH451DS1.PDF CH451 datasheet. CH451 can be used for 8×8 segment digital tube drive and 64-key keyboard scanning control, cascading 10MHz high-speed 4-wire interface to simplify the workload of MCU.
CH450DS1.PDF CH450 datasheet. CH450 is used for driver of 48 LEDs or 6 digital tubes and for 48-key keyboard scan control, compatible with high-speed two-wire interface.
CH454DS1.PDF CH454 datasheet. CH454 is used for display driver of 16-segment LED displays or 8 alphanumeric displays and for keyboard scan control, supports 17 segments x 7 digital tubes, 16 segments x 8 digital tubes and 8 segments x 16 digital tubes.
CH456DS1.PDF CH456 datasheet. CH456 is used for 16 digital tubes display drive and 64-key keyboard scanning. CH456 supports 2-wire serial interface, and is compatible with IIC, simplifying the workload of MCU.
CH423DS1.PDF CH423 datasheet. A remote I/O expander with 2-wire serial interface, used for 16 digital tube display or I/O expansion applications through two wires. The input terminal is a two-wire interface compatible with I2C, and the output terminal is an 8-bit bidirectional input/output port and a 16-bit high-current output port.
CH453DS1.PDF CH453 datasheet. CH453 can be used for 128 LEDs or 16×8 segment digital tube drive and 64-key keyboard scanning control.
CH462DS1.PDF CH462 datasheet. LCD display driver, as well as 128-dot LCD display drive controller. CH462 provides an on-chip clock oscillation circuit, and supports LCD operating voltage adjustment. The maximum size of supported LCD panel is 32×4.